FIRE

BACKGROUND INFORMATION

Even a small fire can cause injuries from smoke inhalation as well as serious property damage. Everyone has responsibility for preventing fire in the workplace. Learn what to do in the event of a fire you will not have time once a fire starts.

---

HAZARDS

• Heaters, cigarettes, matches, cookers, and other ignition source.
• Flammable materials, liquids or gases ignited by heat source.
• Smoke from fire causing injury or asphyxiation.
• Welding or other hot works igniting flammable materials.

---

HEALTH AND SAFETY POINTS

• Make sure you know what the fire precaution rules and Emergency Procedures are for your site. Know who your fire warden is.
• Don't obstruct escape routes or access to fire extinguishers and know how they operate - ask if you think training is needed.
• Do not place yourself at risk if you try to tackle a fire. Make sure you always have and escape route.
• Do not hang clothing over heaters.
• Dispose of paper, rubbish and oily rags promptly in suitable containers.
• Always observe 'No Smoking' signs.
• Store flammable materials in closed steel containers not buckets or open tins.
• Remove or protect flammable materials before using blowlamps, welding or cutting equipment. Check the area afterwards, smouldering material can burst into flames hours later if left.
• Asphalt pots, crucibles, soldering irons and gas rings must be on non-combustible stands.
• Rubbish fires must not be lit on site.
• Disconnect electrical equipment when it is not in use.

---

QUSTION TIME

• How would you raise the alarm in the event of a fire?
• When must you do before carrying out welding or other hot works?

---

SAFETY REMINDER

Keep your workplace free of fire hazards.  Take time to learn where the fire points are and how to use fire extinguishers.